WiebeTech UltraDock v4 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Boîtiers des disques durs et des disques durs dynamiques WiebeTech UltraDock v4. WiebeTech UltraDock v4 User manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
A Brand of CRU-DataPort A Brand of CRU-DataPort
Forensic UltraDock™ v4 Quick Start Guide
Forensic Device User Advisory
Before using this tool for accessing sensitive data, it’s
a good idea to verify the write-blocking function of
the product. This is easily done: attach a known good
formatted drive, and verify that the drive mounts properly
on your computer. Copy files to the drive. Due to the
“spoof writing” style of write-blocking employed by this
product, the files will appear to copy successfully. Next,
unmount and remount the drive. The files that you copied
should not appear after the drive is remounted. If they do appear, there is a problem with your
forensic device, and you should contact our support department for further instructions.
CRU-WiebeTech support may be reached at 866-744-8722 (toll free) or support@wiebetech.com (email).
1. Installation Steps
1.1 Attaching a Bottom Plate to your 3.5 inch Drive.
(This step is optional but recommended.) The purpose of the plate is to provide
protection to the drive electronics and aid heat dissipation.
a. Attach the bottom plate to the drive using the four
screws supplied.
b. Attach a rubber bumper to each corner.
1.2 Attaching SATA Drives (3.5 inch & 2.5 inch)
a. Insert Forensic UltraDock’s 4-wire power cable into the
corresponding socket on the SATA power/data combo
cable.
b. Plug the SATA power/data combo cable into UltraDock’s SATA port.
c. Plug the SATA power/data combo connector into the drive.
Forensic UltraDock and WiebeTech are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners.
© 2008, 2011 CRU Acquisitions Group, LLC. All rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants Forensic UltraDock to be free of significant defects in material and workmanship for a period of two years from the original date of
purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability: The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation and
hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CRU or its suppliers be
liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect,
consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the
possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and
additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is operated in a home or commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
A9-000-0014-1 Rev. 1
Product Name Forensic UltraDock v4
Drive Compatibility 2.5-inch & 3.5-inch SATA drives
3.5-inch IDE/PATA drives
Additional types using optional Combo Adapters
Host Interfaces eSATA
FireWire 800 (two ports, daisy-chainable)
FireWire 400
USB 2.0
Power Supply Input: 100-240VAC; Output: +12V / +5V
Operating System Windows 7, Vista, XP
Mac OS X
Linux distributions supporting FireWire
Shipping Weight 3 pounds, including accessories
Compliance CE, FCC, RoHS, C-Tick
Support We don’t want anything to go wrong with your product. But if it does, Tech Support is
standing by and ready to help. Contact us through wiebetech.com/techsupport. Phone
support also available at (866) 744-8722. WiebeTech is a brand of CRU.
For more information and the full user manual for this product, please
visit http://www.wiebetech.com/techsupport.php. WiebeTech is a brand of CRU.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - 1. Installation Steps

A Brand of CRU-DataPort A Brand of CRU-DataPortForensic UltraDock™ v4 Quick Start GuideForensic Device User AdvisoryBefore using this tool for accessi

Page 2 - 3. Forensic Software Utility

A Brand of CRU-DataPort A Brand of CRU-DataPort2.2 Using Forensic UltraDock v4 with Combo Adapters CRU-WiebeTech offers optional Combo Adapters that

Commentaires sur ces manuels

Pas de commentaire